K7S7AG-Socket A Motherboard

With Built-in 8.1 Video Card

Special Features

-DirectX 8.1

-AGP 8X

-USB 2.0

Processor

-462 pin Socket A supports AMD K7 processors, full series of Athlon XP/ Athlon/ Duron processors.

Chipset

-SiS746 & SiS963 Chipset with following features: integrated USB 2.0 host controller

-Xabre 200 GPU

-Built-in 256-bit 3D/2D engine

-AGP v3.0 compliant with 8x transfer mode.

-Build-in 375MHz RAMDAC

-DirectX8.1 compliant, with hardware pixel shader

-64MB Display memory, eight 4Mx16 bit chips, 200MHz memory clock

-LPC I/O:ITE8705F

-System Hardware Monitor: Integrated in ITE IT8705F

-Audio : AC97 Codec CMI9739 6 channel

-LAN: VIA VT6103 (optional) -

-IEEE 1394a - RTL8801B (optional)

Main Memory

-2 DDR DIMM Sockets support two 184-pin 2.5V DDR SDRAM (DDR200/266/333/400)

-Max. 2GB

BIOS

-AMI 2Mb Flash EEPROM

-Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI

-Support ACPI revision 1.0 specification

Expansion Slots

-3 PCI slots

-1 CNR slot

I/O Interface

-PS/2 keyboard and PS/2 mouse connectors

-Four USB2.0 Ports and a LAN connector

-One EPP/ECP mode parallel port

-One 16550 high-speed serial I/O port

-One VGA connector

-Audio ports (Mic, Audio-in, Audio-out port)

-One RJ45 LAN port (optional)

-One IEEE1394 port (optional)

-Dual PCI IDE interfaces : support four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 100/133)

-Supports 360K~2.88M Byte, 3 Mode FDDs or LS120

-ATX Power Supply Connector

-IR header (SIR)

-Internal PC speaker header

-CD ROM/DVD Audio Input header

-2 Extra USB2.0 Ports

-Additional one IEEE 1394a header

-HDD LED, Reset Switch, Suspend LED, Power Switch headers

-CPU and chassis Fan headers

-Wake On LAN header

RTC & Battery

-Integrate CMOS SRAM in SiS963/963L

-With CMOS hardware clear jumper

Form Factor & Layer

-ATX (305mm*244mm), 4 Layers

 

Video card (on board) Specifications on request due to page limitations.